Fuel Injector Repair & Service in Hyderabad
Precision injector diagnostics, cleaning, and repair - Bosch, Delphi, Denso, Siemens specialists
Metre Per Second is Hyderabad's premier fuel injector repair center with specialized equipment for both petrol and diesel injection systems. Our injector workshop features ASNU-compatible testing equipment, Bosch CRI test benches, ultrasonic cleaning tanks (40 kHz), and precision flow testing apparatus. We work with all major injector manufacturers: Bosch (CRI/CRIN series), Delphi (DFI series), Denso (piezo & solenoid), Siemens VDO, and Continental. Our services cover complete fuel injection systems: MPFI (Multi-Point), GDI (Gasoline Direct Injection), TDI (Turbocharged Direct Injection), CRDi (Common Rail Diesel Injection), and modern piezo-electric injectors. Our technicians are trained in IMA coding, injector quantity adjustment (IQA), and ECU adaptation procedures essential for proper injector replacement. We provide comprehensive reports with before/after flow data, spray patterns, and leak-down test results. With our 1-year warranty and turnaround of 24-48 hours, we restore your engine's fuel efficiency, power output, and smooth operation.
Common Fuel Injectors Problems We Fix
Clogged Injectors
Carbon and varnish deposits restrict fuel flow and spray pattern
Symptoms:
- Rough idle
- Hesitation
- Poor fuel economy
- Misfires
Solution: Ultrasonic cleaning, flow testing, and spray pattern verification
Leaking Injectors
Internal or external leaks cause rich running and fuel smell
Symptoms:
- Fuel smell
- Black smoke
- Hard starting when hot
- Rich running
Solution: Seal replacement, pintle repair, or injector replacement if internal leak
Dead Injector
Injector fails to open due to electrical or mechanical failure
Symptoms:
- Cylinder misfire
- Check engine light
- Rough running
Solution: Electrical testing, coil repair or replacement, mechanical inspection
Poor Spray Pattern
Worn or damaged nozzle creates improper fuel atomization
Symptoms:
- Increased emissions
- Reduced power
- Poor combustion
Solution: Nozzle reconditioning, tip cleaning, or nozzle replacement
Our Diagnostic & Repair Process
- On-Car Testing: Injector balance test and noid light testing while installed
- Visual Inspection: Remove and inspect for external damage, corrosion, and filter condition
- Flow Testing: Measure fuel delivery volume at various duty cycles
- Leak Testing: Static and dynamic leak testing under pressure
- Spray Pattern Analysis: Visual verification of spray cone angle and atomization
Fuel Injectors Services & Pricing
| Service | What's Included | Duration | Price Range (INR) |
|---|---|---|---|
| Injector Cleaning | Ultrasonic cleaning with flow and spray pattern testing | 2-4 hours | ₹500 - ₹1,500 per injector |
| Injector Service Kit | Complete service including seals, O-rings, and filter baskets | 3-4 hours | ₹800 - ₹2,000 per injector |
| Injector Rebuild | Full rebuild with new internals and calibration | 1-2 days | ₹2,500 - ₹5,000 per injector |
| Flow Matching Set | Clean, test, and match flow rates for balanced performance | 4-6 hours | ₹3,000 - ₹8,000 per set |
All prices are 35–55% below authorised dealer rates. Written estimate before any work begins. 1-year / 20,000 km warranty on parts and labour.
Why Choose Metre Per Second for Fuel Injectors
- Advanced Testing: Professional injector test bench for accurate flow and spray analysis
- Ultrasonic Cleaning: Deep cleaning that removes deposits without damaging injector
- Calibration Capability: Flow matching service for optimal engine balance
- All Fuel Systems: Port injection, GDI, and diesel common rail expertise
Technical Specifications
- Flow Testing
- cc/min at 43.5 PSI standard
- Leak Test
- 45 PSI for 10 minutes maximum
- Cleaning Frequency
- 40 kHz ultrasonic with heat
- Spray Angles
- Verified against manufacturer specs
Frequently Asked Questions — Fuel Injectors in Hyderabad
How often should fuel injectors be cleaned?
We recommend cleaning every 50,000-75,000 km, or sooner if you notice symptoms. Using quality fuel and occasional fuel system cleaner additives helps extend intervals.
Can clogged injectors be cleaned or must they be replaced?
Most clogged injectors can be successfully cleaned. Only severely damaged or electronically failed injectors need replacement.
How do I know if my injectors are bad?
Symptoms include rough idle, misfires, poor fuel economy, hard starting, and engine hesitation. A proper flow test provides definitive diagnosis.
Are rebuilt injectors as good as new?
Quality rebuilt injectors with new internals perform like new at a fraction of the cost. We test and calibrate all rebuilt injectors.
Customer Reviews — Fuel Injector Repair in Hyderabad
Car was running rough and drinking fuel. Injector cleaning at MPS fixed both issues. Great service!
All 4 injectors cleaned and flow matched. Engine is so smooth now. Highly recommend their injector service.
Service Areas in Hyderabad
We provide fuel injectors service with free pickup and drop across:
- KPHB
- Kukatpally
- Miyapur
- Hitech City
- Gachibowli
- Madhapur
- Kondapur
- Jubilee Hills
- Banjara Hills
- Secunderabad
Related Services
Book Fuel Injector Repair in Hyderabad — Metre Per Second
Call +91 8555824915 or WhatsApp +91 8555824915 for a free quote.
Workshop: Plot No. M-8, Mahadevpuram, KPHB Road, Gajularamaram, Hyderabad, Telangana 500055